Surface repairs · Melbourne & Geelong
Repaired, not replaced.
Chips, dents and scratches in baths, benchtops, tiles, frames and floorboards. Repaired on site, for far less than replacing them.
Send a photo of the damage and we will tell you whether it can be repaired. Quotes are free, and there is no obligation.
Melbourne's west and north west, from Sunbury and Bacchus Marsh down through Werribee to Geelong and the Surf Coast.
Surfaces
What we repair
-
Bench tops, shelves and cabinetry
Chips, scratches or dents repaired on site.
Laminate, granite, marble and stone.
-
Baths, spas and shower bases
Chips, gouges and stress cracks in the surface, filled, colour-matched and finished flat.
Acrylic and metal.
-
Basins, toilets and tiles
A chipped tile in the middle of a wall does not mean retiling the wall.
Porcelain and ceramic: hand basins, toilets, floor tiles and wall tiles.
-
Powder coated tapware and frames, kitchen sinks and troughs
Dents, scuffs and scratches on the metalwork around the wet areas.
Stainless steel and chrome.
-
Aluminium frames and surfaces
Dents and knocks from deliveries, trades and everyday traffic, straightened and refinished.
Colorbond and aluminium: window frames, door sills, garage doors, down pipes, guttering, fascias and recess frames.
-
Floorboards and staircases
Chips, dents and deep scratches in timber, repaired board by board rather than sanded floor-wide.
Floating boards and timber staircases.
-
Polishing and restoring
Not everything that looks bad is chipped. Dull, scratched and clouded surfaces polished back instead of resurfaced or replaced.
Baths, spa baths and shower bases, plus stainless steel sinks.
-
Brickwork
Chipped and knocked house bricks, made good in the wall. Common on new builds where a delivery or a scaffold has clipped a corner.
Face brick, inside and out.
-
Glass polishing
Scratched glass polished back rather than replaced. Shower screens, splashbacks, windows and glass balustrades.
Ask us about your glass, not every scratch can be polished out.
Not sure whether yours is on the list? Send a photo and we will tell you either way.
On the tools
Brad quotes it, Brad does it, Brad answers the phone.
On site
Repairs are done on site, with no removal, no demolition and no trades queue.
No call out fee
Quotes are free from a photo. Nobody needs to visit first.
Where
Melbourne's north, north west and west, plus Geelong.
Repair vs replace
Most damage doesn't need replacing.
We offer a prompt solution that is much more cost and time effective than replacing damaged baths, shower bases, tiles, kitchen and bathroom cabinets, floor boards plus more.
A chip is usually a small area of a large surface. Replacing that surface means taking out something that still works, and paying for everything that comes with it.
A repair is done in place, on the surface that is already there. In most cases the surrounding tile, bath or benchtop is never touched.
What replacing actually costs you
- Demolition, and the mess that comes with it
- Waiting on a plumber, a tiler or a cabinet maker, in that order
- The bathroom or kitchen out of action while you wait
- Matching tiles or stone that may no longer be available
- A tenant, a guest or a family living around the work
Real jobs
The damage disappears.
Real jobs, photographed before and after. The repairs you cannot pick out afterwards are the point.
Some of these are a single frame with both states in the one picture, and some are a matched pair shot before and after. Either way the labels tell you which is which. Select any photo to see it larger.
Who calls us
Who we help
Different problem, same repair. What changes is the deadline.
-
Renters
You have chipped the bath, the benchtop or a tile, and the final inspection is coming. Most of that damage can be repaired for a fraction of what an agent will quote you to replace the whole thing, and it is repaired in place, so nothing has to be pulled out of the property. Send a photo before you tell anyone it cannot be fixed.
-
Home owners and landlords
Between tenants there is a narrow window where the property is empty and everything has to be sorted at once. A repair happens in that window rather than pushing it out, because there is no trade to book behind it and no room out of action while you wait. One visit, on site, and the bathroom or kitchen is ready to show.
-
Building supervisors
Handover damage is a list, not a single chip, and it is standing between you and practical completion. We work through defects on site without demolition, so a chipped tile or a knocked frame does not turn into a retile, a re-order or another trade back on site.
-
Commercial properties
Schools, hotels, motels, offices, aged care and child care. A room out of service is the actual cost, so the work is done in place, around the people using the building, and the surface goes back into use rather than into a replacement schedule.
The process
How it works
Four steps, and the first one takes about thirty seconds.
-
Send us a photo
Email a photo of the damage to admin@chipawaybath.com.au, or use the form below. A clear shot from about half a metre away, and one from further back, is usually enough.
-
Get a price
We will tell you whether it can be repaired and what it will cost. Quotes are free and there is no obligation.
We aim for a quick turnaround time.
-
Book a time
You pick a time that suits. We bring everything with us.
-
Repaired on site
The repair is done in place, in your bathroom, kitchen or site. Nothing is removed and nothing is sent away.
The work
What actually happens to the chip
A chip repair is not filler and a dab of paint. It is a sequence, and most of the skill is in the middle of it.
-
Mask and protect
Everything around the damage gets covered. Taps, tiles, cabinetry and floor.
-
Clean out the chip
Loose material and any old repair come out. A filler will not hold on a chip that has been left dirty or is still lifting at the edges.
-
Fill and build up
Filled in layers rather than all at once, so it cures properly and does not sink back below the surface later.
-
Shape it back
Cut and sanded back to the original line of the surface. On a bath rim or a benchtop edge, getting the shape right matters more than the colour.
-
Match the colour
Mixed on site against your surface, in your light. This is the part that takes the longest and the part that decides whether you can find the repair afterwards.
-
Seal and finish
Sealed, and the finish matched to what is around it. A gloss bath and a matt stone benchtop need different treatment.
-
Clean up and go
Masking off, area cleaned, and you get told what to avoid for the first day or so.
Colour matching is judgement, not a machine. On very large areas of damage, or on strongly patterned stone, we will tell you upfront what the result will realistically look like before you commit to anything. Not everything can be repaired, and you will hear that from us rather than after the invoice.
Price
What does a repair cost?
Less than replacing the surface. That is the comparison that matters, and it is not close.
Replacing a bath, a benchtop or a wall of tiles is a demolition job with three trades behind it. A repair is one visit.
The honest answer on an exact figure is that it depends on the surface, the size of the damage and how many spots there are. That is why we quote from a photo rather than a price list. Send one through and you will have a number without anyone visiting, and there is no call out fee.
Every quote is free, and there is no obligation to book.
Reviews
What customers say
Taken from our Google reviews, word for word.
-
Brad was efficient, on time, and the job was done perfectly! Very happy with the outcome. Highly recommended!
Anonymous · Google review
-
I dropped my hair straighteners on the edge of the bath in my previous rental property and chipped the edge of the bath as well as inside it. I wish I could show the before and after photos because I am so happy with the way it turned out! I couldn't even tell where the chip had been after he had finished the repair! Price was reasonable, they came out within 3 days and the service I received was very polite and professional. Will definitely be recommending them to anyone who needs a chip fixing!
Anonymous · Google review
Before you call
Common questions
What sort of damage can you actually repair?
Chips, dents, scratches, gouges, drill holes and burns in hard surfaces, including damage from attempted break ins. That covers benchtops, shelves and doors in laminate, granite, marble or stone; baths, spas and shower bases in acrylic and metal; hand basins, toilets and tiles in porcelain or ceramic; shower frames, taps, sinks and troughs in stainless steel and chrome; window frames, door sills, garage doors, down pipes, guttering and recess frames in Colorbond or aluminium; floating boards and staircases in timber; and chipped house bricks. We also polish surfaces that are dull or scratched rather than chipped, including baths, spa baths, shower bases and stainless steel sinks, and we polish scratched glass such as shower screens and splashbacks. If you are not sure, send a photo.
Do you come to me?
Yes. Every repair is done on site. Nothing is removed from the property and nothing is taken away to a workshop.
Will you be able to see the repair afterwards?
The aim is that you cannot. Repairs are colour-matched and finished flush with the surrounding surface. The before and after photos above are real jobs, not samples. On very large areas of damage, or on some patterned stone, Brad will tell you upfront what the result will realistically look like before you commit to anything.
Do I have to replace the whole bath, tile or benchtop?
Usually not. That is the entire point of the service. Replacing means demolition, new materials, and a plumber, tiler or cabinet maker behind it. A repair treats the damaged area only.
What areas do you cover?
The north, north west and western Melbourne metro areas, and Geelong. If you are just outside that, call and ask. It is worth a conversation.
How do I get a quote?
Email a photo of the damage to admin@chipawaybath.com.au, or send it through the form below. We will come back to you with a price. Quotes are free and there is no obligation.
How much does it cost?
It depends on the surface, the size of the damage and how many spots there are, so we quote each job from a photo rather than working off a price list. There is no call out fee. What is consistent is that it costs less than replacing the surface.
How long does it take?
We aim for a quick turnaround time. Ring and describe the job and we will give you a realistic answer for your surface.
Coverage
Where we work
Melbourne's west and north west, and the Geelong region.
The eastern edge runs roughly from Point Cook up to Sunbury. West of that we cover Truganina, Deanside, Rockbank, Melton and out to Bacchus Marsh, then south through Werribee and down the M1 past Little River and Lara into Geelong, Mt Duneed, Ocean Grove and Torquay.
We do not work in the city itself or the northern suburbs.
If your suburb is not on the map, it does not mean the answer is no. Call us on 0413 317 644 and ask.
Suburbs we are asked about most
- Sunbury
- Diggers Rest
- Melton
- Bacchus Marsh
- Rockbank
- Aintree
- Fraser Rise
- Deanside
- Thornhill Park
- Truganina
- Tarneit
- Hoppers Crossing
- Werribee
- Point Cook
- Little River
- Lara
- Corio
- Geelong
- Mt Duneed
- Ocean Grove
- Torquay
Examples only, not a complete list. The linked suburbs have their own page.
Free quote
Send us a photo
A photo is the fastest way to a price.
Send one through with a couple of lines about what happened, and we will come back to you with a quote. If you would rather just talk it through, call 0413 317 644.
Thanks, that has gone through.
He has your photos and your number, and he will be in touch about a price. If it is urgent, call him on 0413 317 644.